220V Double Roller Crusher 200 * 75mm Laboratory Double Roll Crusher Roll Crusher Seal Crushing

This machine is a smooth double-roller crusher, which is suitable for the laboratories and laboratories of geology, metallurgy, building materials, chemical industry, coal, mineral processing, scientific research institutes, colleges and universities, etc. to crush all kinds of medium and low hardness For ore or rock, its compressive strength is not higher than 700 kg/cm.Using ＆ Maintenance（1）Check carefully whether the fasteners are firm and tight.（2）Whether the transmission belt is in good condition. If it is damaged, replace it in time, and wipe it clean when there is oil on the belt or pulley.（3） After checking that all parts of the machine are normal, it can be started.（4） The machine is only allowed to start when there is no load.（5）After starting, check the direction of roll rotation.（6）After starting, if an abnormal situation is found, the machine should be stopped immediately, and the cause can be found before restarting.（7） If there is a jam or shutdown during use, immediately cut off the power supply and remove the material.（8）Keep the machine clean. After each use, wipe off the dust and coal dust on the machine in time. Item:021535

• PARAMETER:Roll size (diameter × Width):200*75mm(7.9”*3inch);Maximum loading size:10mm(0.4inch);Discharge particle size:0-4mm(≤0.16inch);Production capacity (when the roller gap is 4mm):860 kg/h;Roll rotation speed:450 rpm;Pulley size:280*60mm(11*2.4inch);Motor power:1.5 kW
• FEEDING PORTS ON BOTH SIDES:Large feeding amount,uniform feeding,large crushing amount.
• SOLID DOUBLE ROLLER WHEEL:Uniform discharge size,adjustable discharge size,strong wear resistance.
• DISCHARGE SIZE ADJUSTMENT:The clockwise rotation spacing becomes smallerand the clockwise rotation spacing becomes large.
• COPPER CORE MOTOR:Sufficient power,low noise,strong overload capacity.