APC Metered-by-Outlet with Switching Rack PDU ZeroU 2G - power distribution unit - 2880 VA

<p>APC Metered-by-outlet with Switching Rack Power Distribution Units (PDUs) provide active metering of individual outlets and remote on/off switching control of individual outlets. Metering-by-outlet allows users to enable energy optimization and detailed capacity planning. User-defined alarm thresholds mitigate risk with real-time local and remote alerts to warn of potential circuit overloads. The Metered-by-outlet feature provide a granular level of power utilization data that allow Data Center Managers to make precise decisions on load balancing and right sizing IT environments to lower total cost of ownership. The Switching feature enables advanced, user-customizable power control. The Switching feature provides remote power on/off outlet level controls for power cycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing time delays allow users to define the order in which to power up or down attached equipment to avoid circuit overload. Current metering provides real-time remote monitoring of connected loads with user-defined alarms to warn of potential circuit overloads. Users can access, configure, and control Metered by Outlet with Switching Rack PDUs through secure Web, SNMP, Command Line Interface, or Telnet Interfaces which are complimented by APC Centralized Management platforms using StruxureWare Data Center Expert, Operations, Capacity, and Energy Efficiency. New AP8000 series Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, and locking IEC receptacles.</p><p></p> Device Type: Power distribution unit - rack-mountable Color: Black Height (Rack Units): 0U Interfaces: <ul><li>1 x management (RS-232)</li><li>1 x management (Ethernet) - RJ-45</li><li>1 x management (USB) - 4 pin USB Type A</li><li>1 x monitoring</li></ul> Service &amp; Support: 2 years warranty Service &amp; Support Details: Limited warranty - 2 years Features: Firmware upgradable Compliant Standards: cUL, ICES-003, RoHS, UL 60950-1, FCC Part 15 A, PSE Mark, REACH Rack Mounting Kit: Included Cables Included: <ul><li>1 x power cable - 10 ft</li><li>1 x serial cable - external</li></ul> Remote Management Protocol: SNMP, Telnet, HTTP, HTTPS, SSH, CLI Remote Management Interface: Ethernet 10/100, RS-232, USB Min Operating Temperature: 23 °F Max Operating Temperature: 113 °F Humidity Range Operating: 5 - 95% Input Voltage: AC 100/120 V Frequency Required: 50/60 Hz Output Voltage: AC 100/120 V Circuit Protection: Circuit breaker Input Voltage Range: AC 100 - 120 V Power Output Connectors Details: 24 x power NEMA 5-20 Max Electric Current: 30 A Power Capacity: 2880 VA Input Connectors: 1 x power NEMA L5-30 Width: 2.2 in Depth: 2 in Height: 72 in Weight: 17.75 lbs Shipping Width: 6.5 in Shipping Depth: 4.7 in Shipping Height: 80.4 in Shipping Weight: 22.3 lbs Designed For: P/N: AR3100 Manufacturer Warranty: 2 years warranty Dimensions (WxDxH): 2.2 in x 2 in x 72 in Weight: 17.75 lbs Networking: Ethernet 10/100, RS-232, USB Device Type: Power distribution unit - rack-mountable Remote Management Protocol: SNMP, Telnet, HTTP, HTTPS, SSH, CLI Input Voltage: AC 100/120 V Output Voltage: AC 100/120 V Rack Size: 0U Power Capacity: 2880 VA Designed For: P/N: AR3100 Input Connectors: 1 x power NEMA L5-30 Output connectors: 24 x power NEMA 5-20

• 100V-120V Input, Metered-by-Outlet Switching 30A rackmount Power Distribution Unit
• Input: NEMA L5-30P (2.9 kW)
• Output Receptacles: Twenty-four (24) 5-20R Outlets
• 0U Vertical Mounting PDU
• Cord Length: 9.8'