Dolphin Pumps 3500-1 Diamond Amp Master Aquarium Pump

All Dolphin Amp Master Pumps are manufactured using one impeller designed to operate on each motor as close to 100% efficiency as possible. For this reason we do NOT offer the gimmick of multiple impellers or smaller impellers on the same motor running at poor efficiency rates. Flow rates on all Amp Master Pumps may be dialed back with a discharge ball valve to any desired flow rate with no harm to the pump. Amperage rate will drop as flow rate is reduced to your desired rate. The most efficient way to plum any system is to install a ball valve at the discharge union then a tee fitting plumbing a closed loop manifold with return reducing tees wherever you want a flow return. A closed loop can be any shape or design as long as both ends return to the tee at the ball valve. This ensures even pressure through your return manifold. All Dolphin Pumps have pre-filter priming pots available for installations where water is being drawn up from source or when pre filtration of debris is needed. Diamond Amp Master pumps come in the following models: DIAMOND AMP MASTER 3500 Dimensions 12 x 6 1/4 x 81/4 Silent, cool running 1/15 HP 1725 RPM Circulates 3500 GPH without heat transfer Factory warranty 2-3 years (dependent on seal selection) Suggested use: 55 gallon and over Volt: 115 Supplied with 1.5 super seal unions and anti-vibration pump pad.

• Quiet and cool running 1/15 HP, 1725 RPM
• Circulates 3500 GPH without heat transfer
• 115 volt, 3' corded
• Supplied with 1.5" super seal unions and anti-vibration pump pad
• 3-year factory warranty + factory service guarantee